? 2000 sensitron semiconductor ? 221 west industry court ? deer park, ny 11729-4681 phone (631) 586-7600 ? fax (631) 242-9798 ? www.sensitron.com ? sales@sensitron.com sensitron semiconductor technical data data sheet 650, rev. b hermetic power s chottky rectifier very low voltage drop description: a 45 volt, 7.5 amp, power schott ky rectifier in a shd-1/1b package. maximum ratings all ratings are @ t c = 25 c unless otherwise specified. rating / condition symbol max. units peak inverse voltage piv 45 volts maximum dc output current (w ith cathode ma intained @ t c =100 o c) i o 7.5 amps maximum nonrepetitive forward surge current (t=8.3ms, sine) i fsm 140 amps maximum junction capacitance (v r =5v) c t 400 pf maximum thermal resistance (juncti on to mounting surface, cathode) r jc 3.2 c/w maximum operating and storage temperature range top/tstg -65 to + 150 c electrical characteristics characteristic maximum forward voltage drop, pulsed (i f = 7.5 amps) t j = 25 c t j = 125 c v f 0.56 0.51 volts maximum reverse current (i r @ 45v piv) t j = 25 c t j = 125 c i r 0.75 35 ma shd116112 SHD116112B
? 2000 sensitron semiconductor ? 221 west industry court ? deer park, ny 11729-4681 phone (631) 586-7600 ? fax (631) 242-9798 ? www.sensitron.com ? sales@sensitron.com sensitron semiconductor technical data data sheet 650, rev. b mechanical dimensions : in inches / mm 0.0 0.2 0.4 0.6 0.8 forward voltage drop - v f (v) 10 -2 10 -1 10 0 10 1 instantaneous forward current - i f (a) typical forward characteristics 125 c 150 c 25 c 0 1020304050 reverse voltage - v r (v) 10 -3 10 -2 10 -1 10 0 10 1 10 2 instantaneous reverse current - i r (ma) typical reverse characteristics 2 5 c 50 c 75 c 100 c 125 c 150 c 0 1020304050 reverse voltage - v r (v) 100 150 200 250 300 350 400 junction capacitance - c t (pf) typical junction capacitance shd116112 SHD116112B shd-1 shd-1b .225.010 (5.71.254) .075 (1.91) max a lumina ring .225.010 (5.71.254) moly lid moly base .090 (2.29) max alumina ring moly base (cathode) .060.010 ( 1.52.254 ) .015.002 (.381.051) .020.005 r (.508.127 ) .225.010 (5.71.254) .150.010 (3.81.254) .375.020 (9.52.508) .225.010 (5.71.254) .015.005 (.381.127) copper anode
? 2000 sensitron semiconductor ? 221 west industry court ? deer park, ny 11729-4681 phone (631) 586-7600 ? fax (631) 242-9798 ? www.sensitron.com ? sales@sensitron.com sensitron semiconductor technical data data sheet 650, rev. b shd116112 SHD116112B disclaimer: 1- the information given herein, including the specifications and dimens ions, is subject to change without prior notice to impr ove product characteristics. before ordering, purchas ers are advised to contact the sensitron semiconductor sales department for the latest version of the datasheet(s). 2- in cases where extremely high reliabilit y is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety s hould be ensured by using semi conductor devices that featur e assured safety or by m eans of users? fail-safe precautions or other arrangement . 3- in no event shall sensitron semiconductor be liable for any dam ages that may result from an accident or any other cause duri ng operation of the user?s units according to the datas heet(s). sensitron semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of info rmation, products or circuits described in the datasheets. 4- in no event shall sensitron semiconductor be liable for any fa ilure in a semiconductor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- no license is granted by the datasheet(s ) under any patents or other rights of any third party or sensitron semiconductor. 6- the datasheet(s) may not be reproduced or duplicated, in any form, in whole or par t, without the expressed written permissio n of sensitron semiconductor. 7- the products (technologies) de scribed in the datasheet(s) are not to be provi ded to any party whose purpose in their applica tion will hinder maintenance of international peace and safety nor are they to be ap plied to that purpose by their direct purchasers or any thir d party. when exporting these products (technolog ies), the necessary procedures are to be taken in accordance with related laws and regulatio ns.
|
